Review Mifi Router AC30 Dual Mode

Unlock Mifi, Dual Mode to GSM and CDMA can, working on freq Dual Band800/1900MHz EVDO 3.1 Mbps. Download 7.2 Mbps HSPA technology will Upload 5.7Mbps, 3.1 Mbps CDMA EVDO Download Upload 1.8Mbps. Battery can be up to 4hours. Can use a USB connection or WiFi. Can share the connection of up to 5 peoplewithin close range.


Specifications:
* Network & Frequency Band
GSM / EDGE 850/900/1800/1900MHz
HSUPA / HSDPA / WCDMA: 2100MHz
CDMA/1X/EVDO: 800/1900MHz
* Power Adaptor
+5 V (DC), 0.7 A Max
* Data Service
HSPA: download 7.2 Mbps 5.7 Mbps upload
CDMA EVDO: download 3.1 Mbps 1.8 Mbps upload
* Dimensions (WxHxD): 99.7 mm * 53.7 mm * 13.9 mm
* Weight: 80g
* USB Version: USB 2.0 High Speed
* Standby time: 100hours
* Working time: 4hours

How to setting ?

AC30 ZTE modem is a modem that can be used as a router. As for the meaning of the Router is a networking device that is used to divide the protocol to the other network members, with the router so a protocol may be sharing the other network devices.

Now for more details, go directly to the scene.

1. You must first install the ZTE modem AC30

2. After you install. Then later on your desktop, an icon will appear AC30 modem ZTE. Now you double click the Icon.

3. The next step you enter the Administrator. For the first time install on the part of you, the admin administrator. Then click the Login button.

4. After that the display menu will appear. Well in this section you click on Quick Setup.

5. After you click the Quick Setup, and then you click the next button at the bottom of the right. See you in PPP Profile Configuration menu .. on the APN settings. You select Manual APN APN, while in the Profile, you select a Profile Name: China Unicom, while APN: Indosat (APN name in accordance with the ISP you use, for example I use indosatm2).

6. If you're ready to fill in data that is at the PPP Profile Configuration. Then you click the next button at the bottom right. So that would later appear PPP Authentication. Now on the PPP username and PPP password according you fill in your ISP's register. (For example I use IndosatM2).

7. If you're ready to fill the data in the PPP Authentication, then you click the Next button the bottom right corner. So that the display will show the SSID Configuration. SSID Name: You fill your own, while you select the SSID Broadcast is Enabled.

8. If you're ready to fill the data in the SSID Configuration, then you click the Next button the bottom right corner. So it will appear Encryption Mode. On the Encryption Mode you select the No Encryption.

9. If you're ready to fill the data in Encryption Mode, then you click the Next button the bottom right corner. So that the display appears as follows Configuration. Well in this section you click Apply button. But before clicking the Apply button, it is advisable to first check your data.

Source : http://livebeta.kaskus.us/thread/000000000000000008683067/review-amp-discuss-mifi-router-ac30-dual-mode